Water Tight Technologies

Water Garden Products
  Water Garden Family of Products
  Water Garden Creation
  RUBBERALL® Liner Membrane Qualities
  Product Specifications
    RUBBERALL® Membrane
   
      Seam Tape
      Tape Primer-Plus
      Membrane Cleaner
      Geotextile Mat
  MSDS Sheets
  Warranty
 
see Printer-Friendly Version 

RUBBERALL® SEAM TAPE DATA SHEET

Seam TapeDescription:
RUBBERALL® Seam Tape is a black, EPDM rubber based product in tape form developed for splicing sheets of RUBBERALL® membrane roofing together. It has been formulated to provide high initial strength in both sheer and peel. Its overall performance over the full range of rooftop weather is unsurpassed. It is unaffected by heat or cold. It is easily applied, offers significant labor savings, and avoids the solvent hazards of contact cements.

Suggested Uses:
RUBBERALL® Seam Tape is specifically developed for use with RUBBERALL® membrane roofing. However, it also adheres well to most types of membrane roofing, as well as to other construction materials such as galvanized metal, painted steel, and aluminum.

Sizes:
RUBBERALL® Seam Tape is produced in rolls of 25' in length with a nominal thickness of 0.035 inches.
Widths Available: 7 Inches
Typical Performance: (Test Temperatures, 70°F)
Peel, pli 5
Shear, psi 15

Product Benefits:

  • Labor SavingsCured Product - 12 month shelf life
  • Superior performance over full range of environmental conditions
  • Quick tack from high to low temperatures
  • May be installed in subzero temperatures
  • Contains NO solvent

Typical Physical Properties **

Base Polymer:

EPDM

Color:

Black

Cure State:

Cured

Tensile Strength:

50 psi minimum

Elongation:

800 % minimum

Brittleness Temperature:

Below -50'F

Specific Gravity

0.98+0.05

Solids Content:

98% minimum

Permeability:

0.6 perm-mils

** Typical Values: (Based on material tested in our laboratories but variable from sample to sample.)Typical Values should not be construed as a guaranteed analysis of any specific lot or as specification items.

Application Instructions:
Surface to be bonded shall be clean and dry, for maximum performance must be cleaned first with RUBBERALL® Membrane Cleaner, and primed with RUBBERALL® Seam Tape Primer. Apply seam tape primer with scrub pads. RUBBERALL® Uncured Flashing Patch should be used at all T-Joints intersections. Overlap from one roll onto another must be at least one inch. Roll entire lap using steel hand roller for 100% adhesion.

Handling:
RUBBERALL® Seam Tapes contain ingredients that could be harmful if mishandled. Contact with eyes and skin should be avoided and protective equipment and clothing should be worn.

Recommended Storage:
RUBBERALL Seam Tape is a cured material and will not degrade in normal warehouse storage. In time, the release paper may become difficult to remove. For this reason, the recommended shelf life is 12 months. ROTATE STOCK.

return to top of page

 
 
Home About RUBBERALL Roofing Products Water Garden Products Contact Us About BRITE-N-EZ BRITE-N-EZ Roofing Products Roof Coatings Site Map
big discount air jordan retro adidas nmd promotion amazon air jordan superfly 2 Under Armour Curry 2 Low SneakerNews asics tiger mexico 66 eBay air jordan 5 retro adidas original nmd uk asics tiger 66 for sale Online Get Cheap Nike Roshe new balance 580 elite edition 2016 new stephen curry 2 colorways under armour speedform gemini reviews Latest New Balance 574 Trainers Nike Roshe on Sale Womens mens Under Armour Scorpio